EVERY NECK IS CUSTOM... MADE TO YOUR SPECIFICATIONS IN THE USA.

Maple / Indian Rosewood Strat Neck  (LIST PRICE $199.00)

1. Brand New and unfinished and made to your specifications in our Southern California Factory.

2. This is only available on at B. Hefner Company and Guitar Alley! 

3. This offer is for a limited time only, if you have any questions or concerns please e-mail us at bhefnerco@verizon.net or call us M-F 8 AM - 4:30 PM PST at 562-945-9490.

These are beautiful Highly sought after necks  made to exacting vintage specifications.

• These necks will fit 4 bolt bodies with a 2.187" neck pocket.
• You have a choice of 1.625", 1.650" or 1.687" nut width, 21 or 22 frets.
• Fingerboard radius of your choice 7.25", 9.5", 10", 12" or 14" (we Do Not offer a compound radius).
• Fret sizes are illustrated and listed below.

WE DO make many different neck shapes, these are made in our custom shop and at no extra cost and are shown below, left handed necks add $25.00.

• The nut is not included nor are the tuners or fretwork (i.e. level, dress, crown and polish).
  
  These are made from Eastern Hardrock Maple and Indian Rosewood, the wood is moisture tested for stability and guaranteed for one year against defects in materials or workmanship.

Here are five fret sizes drawn in correct proportion for comparison. From small to tall, we offer a fret for the most popular styles and preferences. These are the finest frets available made from hard nickel / silver to give you long life with steel strings. For general reference we use Dunlop's fret wire, however,actual fret dimensions vary somewhat from batch to batch. All sizes are listed by width and height. Sizes below are listed by Width or (B) x Height or(A)

B. Hefner Company and Guitar Alley is LICENSED BY FENDER Its headstock profile is a registered trademark of Fender Musical Instrument Corporation and B. Hefner Company is licensed by Fender under a quality control license. B. Hefner Company is not affiliated with Fender and no Fender warranty applies. 562-945-9490

There are a few of our competitors that are licensed to sell Fender parts, did you know they're parts are imports from (China, Korea, Taiwan, Japan or the Czech Republic).

We make parts for many of the number one companies you all know (Gibson, Epiphone, Fender etc.) we also build for many of the best custom guitar companies around the world.

Please look at the attention to detail, the other guys sell their parts as (COMPATIBLE!) We sell our parts as exact to vintage spec as you will find anywhere.

We guaranty you the finest in materials and workmanship AND WE BACK THAT WITH A ONE YEAR WARRANTY ON WORKMANSHIP AND MATERIALS, THE OTHER COMPANIES DON'T; all of our parts are made in our factory right here in Southern California.

Don't settle for the cheap overseas and homemade pieces being auctioned off or sold on the Net. Remember, you get what you pay for!

For the vintage fanatic we also shoot Nitrocellulose Lacquer, the same brand and same process as Leo Fender used, please visit our CUSTOM PAINT SHOP or feel free to call us about it. 562-945-9490.

 

Try our products and see what hundreds of other players already know.

We are committed to your 100% satisfaction!

 

WE SELL WORLD WIDE!

The United Kingdom is our NUMBER ONE European Customer.