STRAT NECK MAPLE / EBONY

SKU: SNME
LEAD TIME: 6 WEEKS (8 WEEKS WITH PAINT/FINISH WORK)
CUSTOM OPTIONS: Please note that custom options may increase the lead time by 2 to 3 weeks. (See warranty/leadtime page for more info)
Price:
$249.99

NECK LEADTIME SCHEDULE:
NUT WIDTH:
NUT TYPE:
NUT PREPARATION:
FINGERBOARD RADIUS:
DOT INLAYS:
PROFILE / SHAPE:
TUNER HOLE SIZE:
FRET QUANTITY:
FRET SIZE:
FRETWORK:
NECK RELIC:
NECK FINISH:
HEADSTOCK PAINT:
TRUSS ROD ADJUSTMENT:
NECK WOOD OTHER:
HEADSTOCK:
ORIENTATION:
SPECIAL INSTRUCTIONS:
Qty: - +
   - OR -   

 

EVERY NECK IS CUSTOM... MADE TO YOUR SPECIFICATIONS IN THE USA.

MAPLE / EBONY STRAT NECK

Brand New and unfinished and made to your specifications in our Southern California Factory.

This is only available on at B. Hefner Company and Guitar Alley!

If you have any questions or concerns please e-mail us at contact@bhefner.com
or call us Monday to Friday from 9:00 AM to 4:30 PM (PST) at 562-945-9490.

 

 

These are beautiful Highly sought after necks  made to exacting vintage specifications.

 

  • These necks will fit 4 bolt bodies with a 2.187" neck pocket.
     
  • You have a choice of 1.625", 1.650" or 1.687" nut width, 21 or 22 frets.
     
  • Fingerboard radius of your choice 7.25", 9.5", 10", 12" or 14" (we Do Not offer a compound radius).
     
  • Fret sizes are illustrated and listed below.

 

 

    • The nut is not included nor are the tuners or fretwork (i.e. level, dress, crown and polish).

      These are made from Eastern Hardrock Maple and Ebony, the wood is moisture tested for stability and guaranteed for one year against defects in materials or workmanship.
 
 

Here are five fret sizes drawn in correct proportion for comparison. From small to tall, we offer a fret for the most popular styles and preferences. These are the finest frets available made from hard nickel / silver to give you long life with steel strings. For general reference we use Dunlop's fret wire, however,actual fret dimensions vary somewhat from batch to batch. All sizes are listed by width and height. Sizes below are listed by Width or (B) x Height or(A)

 

  • 6230 This is the smallest wire found in older Fender necks. Size: .078" x .043"
     
  • 6150 Vintage jumbo. Much wider but not as tall as the 6230. Size: .102" x .042"
     
  • 6105 Contemporary narrow and tall, a very popular choice. Size: .090" x .055"
     
  • 6100 This is Jumbo, the biggest guitar wire available. Size: .110" x .055
     
  • 6130 Often refered to as Medium Jumbo. Size: 106" x .036"
     

B. Hefner Company and Guitar Alley is LICENSED BY FENDER Its headstock profile is a registered trademark of Fender Musical Instrument Corporation and B. Hefner Company is licensed by Fender under a quality control license. B. Hefner Company is not affiliated with Fender and no Fender warranty applies.

There are a few of our competitors that are licensed to sell Fender parts, did you know their parts are imports from (China, Korea, Taiwan or the Czech Republic).

We make parts for many of the number one companies you all know (Gibson, Epiphone, Fender etc.) we also build for many of the best custom guitar companies around the world.

Please look at the attention to detail, the other guys sell their parts as (COMPATIBLE!) We sell our parts as exact to vintage spec as you will find anywhere.

Don't settle for the cheap overseas and homemade pieces being auctioned off or sold on the Net. Remember, you get what you pay for!

Try our products and see what hundreds of other players already know.

We are committed to your 100% satisfaction!

WE SELL WORLDWIDE!

Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.

Add Your Review


Your Name:
Email Address:
Review:
Note: HTML is not translated! Your email address will not be shared with anyone.
Your Rating: 5
Verification:
Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Verification: