|Your cart is currently empty|
PLEASE NOTE: This pickguard will only fit genuine vintage 20 fret Fender® Jazz Bass® from the '70's and '80's. Available with or without thumbrest holes. This pickguard will not fit 22 fret Fender® Jazz Bass®. Please check mount hole positions. If you have any questions or concerns please feel free to contact us anytime via phone, 562-945-9490 or email, firstname.lastname@example.org
Spruce up your guitar with these babies.
They are real wood veneer laminated to plastic to avoid cracking and chipping, unfinished and are truly beautiful.
Each piece is individually unique and is not necessarily like the grain as is shown. There are some little voids on some of the Burl guards but this is inherent of a burl wood and only adds to their beauty.
There are some custom options available from the drop down menu above.
***All pickguards are made-to-order to your specs and are non-refundable!
(However if we made an error, we will certainly replace it).***
DISCLAIMER: Finishing your pickguard requires a delicate application of any finish to the wood veneer; if applying an oil or sprayed finish, it must be done with very dry coats to avoid delamination. Application not applied properly may result in damage. Any modifications to the holes must be made with proper care as to not crack the pickguard. B. Hefner Company will not take any responsibility for damages made from modifications by the purchaser.
B. Hefner Company and Guitar Alley is LICENSED BY FENDER Its headstock profile is a registered trademark of Fender Musical Instrument Corporation and B. Hefner Company is licensed by Fender under a quality control license. B. Hefner Company is not affiliated with Fender and no Fender warranty applies.
There are a few of our competitors that are licensed to sell Fender parts, did you know their parts are imports from (China, Korea, Taiwan or the Czech Republic).
We make parts for many of the number one companies you all know (Gibson, Epiphone, Fender etc.) we also build for many of the best custom guitar companies around the world. Please look at the attention to detail, the other guys sell their parts as (COMPATIBLE!) We sell our parts as exact to vintage spec as you will find anywhere.
WE GUARANTEE you the finest in materials and workmanship AND WE BACK THAT WITH A ONE YEAR WARRANTY ON WORKMANSHIP AND MATERIALS, THE OTHER COMPANIES DON'T; all of our parts are made in our factory right here in Southern California. Don't settle for the cheap overseas and homemade pieces being auctioned off or sold on the Net. Remember, you get what you pay for!
For the vintage fanatic we shoot Nitrocellulose Lacquer, the same brand and same process as Leo Fender used, please visit our CUSTOM PAINT SHOP or feel free to call us about it, 562-945-9490.
Try our products and see what hundreds of other players already know.
We are committed to your 100% satisfaction!