|Your cart is currently empty|
Vintage Spec Tele Body
Made to your specs in our Southern California Factory
This is a two-piece Body, grain matched and moisture tested by hand and guaranteed to weigh around 4 - 5 pounds (depending on wood type as some woods are naturally heavier than others). Highly sought after one piece bodies are available at an extra cost. A rear control cavity to be used without the pickguard is a $35.00 up charge.
These are NOT seconds they are brand new bodies made to Fender Spec right in our Southern California Factory.
Lightweight options are considered as such:
- Anything 4.6 pounds or less is considered ultralight for Swamp Ash for a Tele Body
- Also 4.6 pounds and under is light weight for Alder on a Tele Body
- Lightweight options are not available for : Walnut, Rosewood, Black Korina, Northern Ash, Maple.
- Generally we do not offer Mahogany in lightweight, but you can check with us to see if we have any available.
- Basswood and Sugar Pine are light weight woods
The part pictured is only an example of the type of work we do. All of our parts are as beautiful if not more so than the item shown.
The body is drilled for the neck mounting and wiring holes only, the bridge mounting holes need to be drilled at the time of assembly to insure proper alignment. Everything is built from scratch by B. Hefner Company in Southern California.
The body is routed and shaped as per the photo, custom options are available, just drop us a line and we'll help you in any way we can.
If you have any questions or concerns please e-mail us at firstname.lastname@example.org or call us Monday to Friday from 9:00 AM to 4:30 PM (PST) at 562-945-9490.
B. Hefner Company and Guitar Alley is LICENSED BY FENDER Its headstock profile is a registered trademark of Fender Musical Instrument Corporation and B. Hefner Company is licensed by Fender under a quality control license. B. Hefner Company is not affiliated with Fender and no Fender warranty applies.
There are a few of our competitors that are licensed to sell Fender parts, did you know their parts are imports from (China, Korea, Taiwan or the Czech Republic).
We make parts for many of the number one companies you all know (Gibson, Epiphone, Fender etc.) we also build for many of the best custom guitar companies around the world. Please look at the attention to detail, the other guys sell their parts as (COMPATIBLE!) We sell our parts as exact to vintage spec as you will find anywhere.
WE GUARANTEE you the finest in materials and workmanship AND WE BACK THAT WITH A ONE YEAR WARRANTY ON WORKMANSHIP AND MATERIALS, THE OTHER COMPANIES DON'T; all of our parts are made in our factory right here in Southern California. Don't settle for the cheap overseas and homemade pieces being auctioned off or sold on the Net. Remember, you get what you pay for!
For the vintage fanatic we shoot Nitrocellulose Lacquer, the same brand and same process as Leo Fender used, please visit our CUSTOM PAINT SHOP or feel free to call us about it, 562-945-9490.
Try our products and see what hundreds of other players already know.
We are committed to your 100% satisfaction!